Iron Control Agent is composed of carboxyl complexing agent and reducing agent. Through reduction reaction and complexation reaction, stable complexes are formed to inhibit the formation of Fe(OH)3, so that it always exists in the form of Fe2+ complex ions in the solution and returns to the ground with residual acid, so as to prevent blocking due to the Fe(OH)3 precipitation and be used in the preparation of acid.
| Items | Index |
| Appearance | Primrose yellow liquid to wine red transparency liquid |
| Density,g/cm3 | 1.05~1.15 |
| Fe stabilizing power,mg/mL | ≥100.0 |
| pH value(1.0%solution) | 6.0~8.0 |
| Acid-soluble | mutual dissolution with acid completely |
Dosage and Usage
Recommended dosage shall be 0.5~1.0% or be determined according to technical requirements; Add into acid liquor and dissolve thoroughly before use.
Product Packaging
Packing with plastic drum of 25kg, 200kg or 1000kg, or according to customer's requirement.
Storage and Transportation
This product should be stored in a ventilated and dry warehouse, and should not come into contact with acid, alkali or other chemicals.
This product should be handled with care during transportation and avoid dampness and damage.
Valid for 12 months. This product is non-dangerous and shall be treated as general liquid chemical in transportation.
Al Fahaheel Block 11 Building 9 Street 54Homoud Building Floor 7
Copyright © 2024 Chemitech Solutions Kuwait All Rights Reserved. Powered By Hicheng.
Sitemap
See our Privacy policy
Write A Review