The cleanup additive is composed of fluorocarbon surfactants, hydrocarbon surfactants, and other compounds, which have a strong ability to reduce surface/interfacial tension, improve the backflow rate of fluids entering the well, reduce damage to the formation, and enhance the effectiveness of reservoir transformation. It is used to prepare water-based fracturing fluids and acid fluids. This product has the characteristics of low dosage, good lubrication, high anti emulsification performance, and outstanding thermal stability, making it the first choice for oil and gas reservoir construction and renovation.
| Item | Index |
| Appearance | Colorless to light yellow transparent liquid |
| Density,g/cm³ | 0.95~1.05 |
| pH | 6.0~8.0 |
| Water solubility | Completely miscible with water |
| Surface tension (0.2%aqueous solution), mN/m | ≤25.0 |
| Interface tension (0.2%aqueous solution),mN/m | ≤1.0 |
Dosage and Application
The recommended dosage is 0.10-0.30%, and the dosage can also be determined according to technical requirements; Add to the fracturing fluid base fluid.
Packaging
Packaged in 25kg, 200kg, or 1000kg plastic drums, or packaged according to user requirements.
Storage and Transportation
This product should be stored in a ventilated and dry warehouse and should not come into contact with acids, bases, or other chemicals.This product should be handled gently during transportation to avoid moisture and damage. Valid for 12 months, this product is non hazardous and should be handled as a general liquid chemical during transportation.
Al Fahaheel Block 11 Building 9 Street 54Homoud Building Floor 7
Copyright © 2024 Chemitech Solutions Kuwait All Rights Reserved. Powered By Hicheng.
Sitemap
See our Privacy policy
Write A Review